- #AXIS CAMERA STATION 3.11 CRACK MANUALS#
- #AXIS CAMERA STATION 3.11 CRACK FOR ANDROID#
- #AXIS CAMERA STATION 3.11 CRACK ANDROID#
- #AXIS CAMERA STATION 3.11 CRACK FREE#
Release notes for UgCS v.4.4 (235) - hotfix #1 Issue with the calculation of a route due to error "Automatic calculation of camera trigger distance is not supported for this algorithm.".The calculation of a route failed due to the error "Can't calculate coordinate for specified location.".The upload of a route failed due to the error: "Corner radius must be in range from 0.2 to 1,000.".Issue with calculated camera trigger interval (time/distance) which did not ensure required forward overlap.Path with AGL altitude did not correctly followed terrain.
Sometimes altitude calculated in AMSL mode, did not ensure required GSD. Issues with Corridor mapping and LIDAR corridor tools. Release notes for UgCS v.4.4 (273) - hotfix #2 The wrong length is displayed in the tooltip for segments with curved lines.ĭuplicated warnings about max descent rate exceeded. From now on if a flight altitude on a loop is lower than the safe distance over terrain, UgCS doesn't add this loop to the flight path. The altitude on loops (added by the tools for sharp corners) may be less than the safe distance over terrain. For 'Lidar Area' and 'Lidar Corridor' tools:. Otherwise, UgCS takes into account only FOV of the LIDAR. If 'Camera' is provided then UgCS takes into account not only FOV of the LIDAR (provided in the 'FOV' parameter of the tool) but also FOV of the camera and chooses the smallest one. The 'Camera' parameter is now optional for 'Lidar Area' and 'Lidar Corridor' tools. Reducing the value (default value is 3 meters) increases flight path height precision but takes more time to process the route. We added '' parameter in 'ucs.properties' file. For DEMs with a resolution higher than 3 m, the flight path height calculated by UgCS may be not accurate enough. Release notes for UgCS v.4.4 (337) - hotfix #3 Sometimes, visual artifacts (like a wavy line) were displayed near turn points. The algorithm produced double loops for some turns. The algorithm produced a wrong number of passes when 'Side distance' is provided directly but 'Camera' parameter is not empty. Relative to ground under 1st waypoint - allowing this exported KML route to be imported and used in DJI Pilot or Autel Explorer. 
Export options for altitude when exporting a route as a KML:. Outer corner flight path changed for 'Corridor' and 'LiDAR corridor'. Vehicle profile for DJI Mavic 2 Enterprise Advanced. Introduced the ability to create a LiDAR corridor from KMZ/KML. Release notes for UgCS v.4.4 (382) - hotfix #4 Improvements of overall software’s stability. Sometimes, messages in the route calculation log contained wrong number of waypoints. kmz files.Īn "incorrect input format" error occurred while importing a route for some files exported from the previous versions of UgCS. New users don't have to attach them manually.ģD objects weren't imported from some. Profiles of 'DJI Zenmuse H20/H20T', 'DJI Zenmuse L1', 'DJI Zenmuse P1' are attached to the 'DJI Matrice 300' profile. It is possible to change or remove this action if special settings required. In future each newly created 'Lidar corridor' or a 'Lidar area' segment has the 'Set camera attitude' action with 'Tilt'=90. In future it is not required to restart the UgCS server after activation to connect UgCS for DJI via the 'direct connection' option.Īdditional hints will help to avoid common mistakes during mission planning for LiDAR. Also, if it is required to start/stop data recording at a specific waypoint, it can be done using the new 'lidar recording control' action - which is available for waypoints only.įig.2 - UgCS - New action added to control LiDAR's recording. A corresponding icon is displayed in the hint for the first and the last waypoint of the segment:įig.1 - UgCS - A tooltip for a waypoint with LiDAR recording action From now on, UgCS automatically starts data recording on DJI Zenmuse L1 at the first waypoint of a 'Lidar area' (or 'Lidar corridor') segment and stops data recording at the last waypoint of the segment. DJI Zenmuse L1 recording control (requires UgCS for DJI v.2.33 or newer). #AXIS CAMERA STATION 3.11 CRACK ANDROID#
We recommend to use the Android version of UgCS for DJI.)
#AXIS CAMERA STATION 3.11 CRACK FREE#
get the free UgCS for DJI app for iOS > (The iOS version of UgCS for DJI doesn’t support LIDAR toolset of v.4.4.
#AXIS CAMERA STATION 3.11 CRACK FOR ANDROID#
get the free UgCS for DJI app for Android >. #AXIS CAMERA STATION 3.11 CRACK MANUALS#
MANUALS SUPPORT FEATURES To fly DJI drones with UgCS desktop the mobile companion UgCS for DJI is required
0 kommentar(er)
